Ricoh S-P2 Service Manual page 110

5. Service Tables
5816 209 Instl Clear
5816 250 Comm Log Print
5
Note: The proxy number, user name, and password comprise proprietary customer information required
by the service technician to do the necessary settings for Cumin-N. To prevent unauthorized access this
information, these SP settings do not appear in the SMC report.
5821 Remote Service A(ddress)
5821 1 CSS-PI Device Co(de)
5821 2 RCG IP Address
Paper Supply for DFU
5823
An @Remote setting. Not required for service technician.
NVRAMUpload
Uploads the UP and SP mode data (except for counters and the serial number) from
5824
NVRAM on the control board to a flash memory card.
While using this SP mode, always keep the front cover open. This prevents a software
module accessing the NVRAM during the upload.
NVRAMDownload
5825
108
-2392 Parameter error
-2393 External RCG not managed
-2394 Device not managed
-2395 Box ID for External RCG is illegal
-2396 Device ID for External RCG is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
Releases the machine from its embedded RCG setup.
Prints the communication log.
Sets the PI device code. After changing this setting, you
must switch the machine off and on.
Sets the IP address of the RCG (Remote Communication
Gate) destination for call processing at the remote
service center.
[00000000h to FFFFFFFFh/00000000h/