Ricoh S-P2 Service Manual page 122

5. Service Tables
5860 SMTP/POP3/IMAP
5860 013 POP Auth Encrypt
5860 014 POP Srv Port No.
5
5860 015 IMAP Srv Port No
5860 016 SMTP Rcv Port No
5860 017 Receive Interval
5860 019 Mail Keep Sett.
ParMail RectOut
[1 to 168/72/1]
5860 020
Sets the amount of time to wait before saving a mail that breaks up during reception. The
received mail is discarded if the remaining portion of the mail is not received during this
prescribed time.
120
2: IMAP4
3: SMTP
If POP before SMTP is enabled, then you can use this SP
to enable or disable encryption mode for POP
authentication.
[0-2/0/1]
0: Automatic
1: No encryption
2: Encrypt
Input the POP server port number
This SP sets the number of the IMAP4 server port.
[1 to 65535/143/1]
This SP sets the number of the port that receives SMTP
mail.
[1 to 65535/25/1]
This SP sets the timing for mail received at regular
intervals.
[2 to 1440/3/1 min.]
Note: Setting this SP to "0" switches off receiving mail at
timed intervals.
This SP setting determines whether received mail is stored
on the server.
0: Received mail not stored
1: All received mail stored
2: Stores only mail that generated errors during
receiving