Ricoh S-P2 Service Manual page 92

5. Service Tables
1914 [Nip Measure] Fusing Nip Width Measurement
Measure Exe.
1914 001
Performs the nip width measurement. This is for by-pass tray and used OHP type.
SP2-xxx: Drum
Charge Rol Bias DFU
2001
Adjusts the voltage applied to the charge roller for printing.
[-2000 to 1000/–1670/10V step]
5
Mainscan Mag
2112
Adjusts the main scan magnification.
[-0.5% to 0.5%/0/0.1% step]
Subscan Mag
2113
Adjusts the sub scan magnification.
[-0.5% to 0.5%/0/0.1% step]
Developer Bias
2201
Adjusts the development bias for printing.
[200 to 800/750V/10V step] DFU
Toner End Count
2213
Adjusts the number of prints the machine can make after it detects toner near-end.
[50 to 200/200/50 sheets/step]
Transfer Curr
2301
Adjusts the correction current applied to the transfer roller.
[-4 to +8/0/2 uA /step]
90
[0 or 1 / 0 /-]
0: Not execute, 1: Execute
Main Scan Magnification
Sub Scan Magnification
Transfer Current