Ricoh S-P2 Service Manual page 40

3. Replacement and Adjustment
3
2. Left cover [A] ( x 1)
3. Plate [B] ( x 2)
4. Upper fusing unit assembly [C] ( x 4, springs x 2)
5. Right cover [D] ( x 1)
6. Lamp holders [E] ( x 1 each)
• Remove both springs before taking apart the fusing unit assembly. The reason for this is to relieve
pressure on the unit.
• When reinstalling the fusing unit assembly, install both springs last. The reason for this is to reset
the springs back to their default position.
38