Exiting Service Mode - Ricoh S-P2 Service Manual

5. Service Tables
1. With the machine on, press [] [] together and hold them down for about 5 sec.
2. Press [Enter]. "1. Service Menu" appears on the screen.
Setting a Service Program
1. Enter the service program mode as explained above.
2. The setting that appears on the display is the current setting.
Select the required setting using the "Up/Down arrow" keys,
3. Press the [Enter] key. The previous value remains if the [Enter] key is not pressed.

Exiting Service Mode

Select "3. End" from the service mode main menu, then press the "Enter" key.
5
82