Ricoh S-P2 Service Manual page 137

7932 005 VarietyID
7932 006 Pre VarietyID
7932 007 RFConductTime
7932 008 RemainingCart
Bit What It Means
0 Toner near-end
1 Toner end
2 -
3 Used toner end
4 OPC service life near-end
5 OPC service life end
This is the same type of information read with SP7931 005
from the AIO ID Chip for the cartridge presently installed in
the machine. However, this SP displays the value read from
the EEPROM.
1: 6K
3: 15K
This is the same type of information read with SP7931 005
for the cartridge presently installed in the machine, but this SP
displays the value read from the EEPROM for the previously
installed cartridge.
1: 6K
3: 15K
This SP saves the rotation count (sec.) for the OPC when a re-
filled cartridge is detected. When a re-filled cartridge is
detected, the value for the OPC rotation count is copied from
the AIO ID Chip and saved this SP.
Note:
• If the cartridge is not installed, if the AIO is not set
properly, or if the front door is open, no value will be
displayed because the machine cannot communicate
with the AIO.
• The counter increments by "1" for every 6 sec. of drum
rotation time.
• To calculate the actual time in sec., multiply the
displayed value by 6.
This SP displays the length of the service life that remains for
the OPC.
Printer Engine Service Mode
5
135