Ricoh S-P2 Service Manual page 118

5. Service Tables
Note: This SP does not normally require adjustment. It is enabled only after the system
administrator has set up a group password policy to control access to the address book.
Complexity Opt 4
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to symbols and defines the length of the
5846 065 password.
[0to32/0]
Note: This SP does not normally require adjustment. It is enabled only after the system
administrator has set up a group password policy to control access to the address book.
5848 WebService
5848 004 ac:ud
5
5848 009 ac:jc
5848 011 ac:dm
Log Type:Job 1 DFU
5848 210
[0 to 0xFFFFFFFF/0/1]
Log Type:Job 2 DFU
5848 211
[0 to 0xFFFFFFFF/0/1]
Log Type Access DFU
5848 212
[0 to 0xFFFFFFFF/0/1]
5848 213 PrimarySrv DFU
5848 214 Secondary Srv DFU
StartTime DFU
5848 215
[0 to 0xFFFFFFFF/0/1]
IntervalTime DFU
5848 216
[1 to 100/1/1]
Timing DFU
5848 217
[0 to 2/0/1]
0: Transmission off
116
Switches access control on and off.
0000: OFF, 0001: ON
Note: These SP codes are for display only;
they cannot be changed.