Ricoh S-P2 Service Manual page 102

5. Service Tables
5804 021 Transfer minus
5804 022 Bank1 Motor
5804 024 Bank2 Motor
5804 026 No2 CL
5804 027 No3 CL
5804 028 Dplx Mt Normal
5804 030 Dplx Mt Revers(e)
5804 032 Dplx Mt Long
5804 034 Dplx Split SOL
5
Fusing Err Clr
5810
Resets an SC code for a fusing unit error.
After using this SP mode, turn the main switch off and on.
5811 Machine No. Sett DFU
Used to input the machine serial number. This is normally done at the factory.
Tel. No. Setting
5812
Use these SP modes to input service and support telephone numbers. Enter the number
and press [#Enter].
5812 1 Service
5812 2 Fax Tel No.
5816 Remote Service
I/F Setting
5816 001
Selects the remote service setting.
[0 or 2 / 2 / 1 /step]
100
-
Paper Tray Motor-1st Opt. Paper Tray
Paper Tray Motor-2nd Opt. Paper Tray
Paper Feed Clutch-2nd Opt. Paper Tray
Paper Feed Clutch-3rd
Duplex Inverter Motor-forward
Duplex Inverter Motor-reverse
Duplex Transport Motor
Inverter Gate Solenoid
Use this to input the telephone number of the CE printed on the SP print
mode printout.
Use this to input the fax number of the CE printed on the SP print mode
printout.