Ricoh S-P2 Service Manual page 131

Displays the PM counter. This is not a page counter. It estimates the page count using the
engine rotation cycle count. It counts up one page when the engine has made the average
number of rotations that is required for one page of a three-page job.
7803 001 Paper
7803 002 Transfer Rol(ler)
7803 003 Paper Feed Rol(ler)
7803 004 Fusing Unit
PM Counter Reset
7804
Resets the PM counter. To reset, press [#Enter].
7804 001 Paper
7804 002 Transfer Rol(ler)
7804 003 Paper Feed Rol(ler)
7804 004 Fusing Unit
SC/Jam Clear
7807
Resets the SC and jam counters. To reset, press [#Enter].
Note: This SP does not reset the jam history counter: SP7-507
DiagResult
7832
Press [#Enter] to display a list of error codes. Nothing is displayed if no errors have
occurred.
TotalMemorySize
7836
Displays the memory capacity of the controller system.
7901 Assert Info
7901 001 File Name
7901 002 # of Lines
Records the location where a problem is detected in the program. The
data stored in this SP is used for problem analysis.
Printer Engine Service Mode
5
129