Ricoh S-P2 Service Manual page 107

5816 069 CERT Up ID
5816 083 Firm Up Status
5816 084 Non-HDD Firm Up
5816 085 Firm Up User Che(ck)
5816 086 Firmware Size
5816 087 CERT: Macro Ver.
5816 088 CERT: PAC Ver.
5816 089 CERT: ID2Code
5816 090 CERT: Subject
5816 091 CERT: SerialNo.
5816 092 CERT: Issuer
5816 093 CERT: Valid Start
5816 094 CERT: Valid End
Manual Polling
5816 200
The ID of the request for certification.
Displays the status of the firmware update.
This setting determines if the firmware can be updated, even
without the HDD installed.
0: Not allowed update
1: Allowed update
This SP setting determines if the operator can confirm the
previous version of the firmware before the firmware update
execution. If the option to confirm the previous version is
selected, a notification is sent to the system manager and
the firmware update is done with the firmware files from the
URL.
Allows the service technician to confirm the size of the
firmware data files during the firmware update execution.
Displays the macro version of the @Remote certification.
Displays the PAC version of the @Remote certification.
Displays ID2 for the @Remote certification. Spaces are
displayed as underscores (_). Asteriskes (***) indicate that
no @Remote certification exists.
Displays the common name of the @Remote certification
subject. CN = the following 17 bytes. Spaces are displayed
as underscores (_). Asterisks (***) indicate that no DESS
exists.
Displays serial number for the @Remote certification.
Asterisks (***) indicate that no DESS exists.
Displays the common name of the issuer of the @Remote
certification. CN = the following 30 bytes. Asteriskes (***)
indicate that no DESS exists.
Displays the start time of the period for which the current
@Remote certification is enabled.
Displays the end time of the period for which the current
@Remote certification is enabled.
Printer Engine Service Mode
5
105