Ricoh S-P2 Service Manual page 155

3. Insert the SD card that currently holds the application in Slot 1.
4. Insert the original SD card to receive the restored application in Slot 2.
5. Turn on the main power switch.
6. Enter the SP mode and do SP5873 "Undo Exec."
7. Follow the messages on the operation panel to complete the procedure.
8. Exit the SP mode.
9. Turn off the main power switch.
10. Remove both SD cards.
11. Insert the SD card with the restored application in Slot 1.
12. Turn on the main power switch.
13. Confirm that the application operates normally.
SD Card Application Move
153
5