Ricoh S-P2 Service Manual page 114

5. Service Tables
Initializes the hard disk and clears all data. Use this only if there is a hard disk error.
Prog Checksum
5837
Displays the checksum for the engine firmware.
5840 IEEE 802.11b
Channel Max
Sets the maximum range of the bandwidth for the wireless LAN. This bandwidth setting
5840 006
varies for different countries.
[1 to 11(NA) or 13 (EU)/11 (NA) or 13 (EU)]
Channel Min
5
Sets the minimum range of the bandwidth for operation of the wireless LAN. This
5840 007
bandwidth setting varies for different countries.
[1 to 11(NA) or 13 (EU)/1 (NA) or 1 (EU)]
WEP key number
Determines how the initiator (SBP-2) handles subsequent login requests.
[00 to 11/00/1]
Note: There are four settings (binary numbers): 00, 01, 10, 11. These settings are possible
5840 011
only after the wireless LAN card has been installed.
00: 1st key. If the initiator receives another login request while logging in, the request is
refused.
01, 10, 11: 2nd, 3rd, 4th keys are "Reserved".
NFA analysis DFU
This is a debugging tool. It sets the
5842
debugging output mode of each
Net File process.
Bit SW 0011 1111
112
Netfile Analysis
Bit Groups
0 System & other groups (LSB)
1 Capture related
2 Certification related
3 Address book related
4 Machine management related