Using The Auxiliary Bus Control Block For Router Control - Sony MVS-8000X System User Manual

Multi format switcher system

Hide thumbs Also See for MVS-8000X System:

Table of Contents

and M/E-1 Key 1 to 8 Fill/Source

M/E-1 EXT DME, P/P EXT DME, DME Utility 1 and 2, and CCR 1 and 2

• For a button for which you want to disable operation, press [Inhibit].

Press [Set] to confirm the selection.

To set the AUX delegation button shift operation

To set the operation mode of the rightmost button in the row of AUX

delegation buttons, select one of the following in the <Shift Mode> group of

the Panel >Aux Assign menu.

Hold: Acts as a shift button, and the shifted version of the AUX delegation

buttons is enabled while the button is held down.

Lock: Acts as a shift button, and pressing the button toggles between the

shifted version and the unshifted version of the AUX delegation buttons.

Off: Acts as an AUX delegation button. In a 16-button system it acts as button

number 16, in a 24-button system as button number 24, and in a 32-button

system as button number 32.

Using the Auxiliary Bus Control Block for Router

To make router control settings, display the Setup >Panel >Aux Assign >RTR

Mode Setting menu.

This menu is used to make settings related to "Router Control Menu

Operations" in Chapter 8 (Volume 1).

To display the RTR Mode Setting menu

In the Engineering Setup menu, select VF2 'Panel' and HF3 'Aux Assign.'

The Aux Assign menu appears.

Press [RTR Mode Setting].

The RTR Mode Setting menu appears. The left of the status area shows the

destination number assignment status and source table, and the right side

lists the destinations that can be assigned.

Assigning a destination to a destination selection button

In the Panel >Aux Assign >RTR Mode Setting menu, use the following

Using any of the following methods, select a destination selection button

and the destination to be assigned to the button.

Auxiliary Bus Control Block Settings (Aux Assign Menu)