Figure 135. USB flash drive removal
Step 1.
Remove the cover (see "Removing the compute node cover" on page 113).
Step 2.
Locate the USB connector on the system board (see "System-board internal connectors" on
page 22).
Step 3.
Pull the USB flash drive out of the connector.
If you are instructed to return the USB flash drive, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
Installing the USB flash drive
Use this information to install the USB flash drive.
Before you install the USB flash drive, complete the following steps:
1. Read "Safety" on page v and "Installation guidelines" on page 101.
198
Lenovo NeXtScale nx360 M5 Installation and Service Guide