Lenovo NeXtScale nx360 M5 Installation And Service Manual page 181

Step 3. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node
with the bezel pointing toward you.
Step 4. Remove the cover (see "Removing the compute node cover" on page 113).
Step 5. Pull the plunger of the 2.5-inch hard disk drive cage outward and rotate the cage upward.
2.5-inch Hard disk
drive cage
2
Figure 92. Lift the 2.5-inch hard disk drive cage upward
Step 6. Push this latch gently outward a little to let the screw un-hold by the latch hole. Then, remove
the hard disk drive.
Release latch
1
Figure 93. 2.5-inch hard disk drive removal
Step 7. Pull the plunger of the 2.5-inch hard disk drive cage outward and rotate the cage downward until
the cage snaps into place.
1
2
Chapter 5
.
Removing and replacing components
167