Lenovo NeXtScale nx360 M5 Installation And Service Manual page 379

• 806f000d-041fffff : The Drive [StorageVolumeElementName] has been added. (SDHV Drive 16)
This message is for the use case when an implementation has detected a Drive has been Added.
May also be shown as 806f000d041fffff or 0x806f000d041fffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Critical - Hard Disk drive
SNMP Trap ID
5
CIM Information
Prefix: PLAT ID: 0162
User Response
No action; information only.
• 806f000f-220101ff : The System [ComputerSystemElementName] has detected no memory in
the system. (ABR Status)
This message is for the use case when an implementation has detected that memory was detected in
the system.
May also be shown as 806f000f220101ff or 0x806f000f220101ff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Memory
SNMP Trap ID
41
CIM Information
Prefix: PLAT ID: 0794
User Response
This is a UEFI detected event. The UEFI(POST) error code for this event can be found in the logged
IMM message text. Please refer to the UEFI(POST) error code in the "UEFI(POST) error code" section
of the Information Center for the appropriate user response. Firmware Error : Sys Boot Status :
Appendix A. Integrated Management Module 2.1 (IMM2.1) error messages
365