Lenovo NeXtScale nx360 M5 Installation And Service Manual page 839

3. If the event persists, continue booting system and update the UEFI image.
4. (Trained service technician only) Replace the system board.
• W.3868001 [W.3868001]
Explanation: IFM: Reset loop avoided - Multiple resets not allowed. IFM: Reset loop avoided - Multiple
resets not allowed
Severity
Warning
User Response
Complete the following steps:
1. Update all firmware (including adapter firmware) to the latest levels.
2. If problem persists escalate to the next level of support.
• W.3868002 [W.3868002]
Explanation: IFM: Error communicating with the IMM - IFM may not be deployed correctly. IFM: Error
communicating with the IMM - IFM may not be deployed correctly
Severity
Error
User Response
Complete the following steps:
1. Update all firmware (including adapter firmware) to the latest levels.
2. If problem persists escalate to the next level of support.
• W.3938002 [W.3938002]
Explanation: A boot configuration error has been detected. Boot Configuration Error
Severity
Warning
User Response
Complete the following steps:
1. F1 Setup -> Save Settings.
2. Retry OOB configuration update.
• W.50001 [W.50001]
Explanation: A DIMM has been disabled due to an error detected during POST. DIMM Disabled
Severity
Info
User Response
Complete the following steps:
Appendix B. UEFI (POST) error codes
825