Major Components Of The Storage Tray - Lenovo NeXtScale nx360 M5 Installation And Service Manual

Battery holder
ML2 riser cage
IMM interposer
adapter
2.5-inch Hot-swap
Hard disk drive
2.5-inch Hard disk
drive cage
Figure 3. Major components of the compute node

Major components of the storage tray

Use this information to locate the major components on the storage tray.
The storage tray is installed on the top of a compute node. Each storage tray supports up to eight 3.5-inch
LFF SATA hard disk drives (with one installed in the compute node).
The ServeRAID adapter can be connects from compute node via PCIe interface to support RAID level-0,
RAID level-1, RAID level-5, or RAID level-10.
The following illustration shows the major components of the storage tray.
1.8-inch solid-state
drive cage
Cover
Heatsink
Microprocessor
Heatsink
filler
PCI riser cage
Chapter 1
1.8-inch solid state
drive backplate
1.8-inch solid
state drive
2.5-inch Hard disk
drive backplate
Air baffle
DIMM
.
The Lenovo NeXtScale nx360 M5 compute node
2.5-inch Hard disk
drive cage
2.5-inch Hard
disk drive
3.5-inch Hard disk
drive cage
3.5-inch Hard
disk drive
Riser serve-RAID
assembly
15