Step 1.
Remove the cover (see "Removing the compute node cover" on page 113).
Step 2.
Align the air baffle hooks with the baffle hook slots on the left hand side of the chassis for the
left air baffle; then, lower the air baffles into the compute node. Press the air baffles down until
it is securely seated.
Note: Close the retaining clip on each end of the DIMM connector before installing the air baffle for
proper cooling.
Figure 30. Air baffle installation (compute node)
Figure 31. Air baffle installation (GPU tray)
Step 3.
Reinstall the cover (see "Installing the compute node cover" on page 115).
Step 4.
Slide the compute node into the rack.
Step 5.
Reconnect the power cords and any cables that you removed.
Step 6.
Turn on the peripheral devices and the compute node.
Removing the PCI riser filler
Use this information to remove the PCI riser filler.
Before you remove the PCI riser filler, complete the following steps:
118
Lenovo NeXtScale nx360 M5 Installation and Service Guide
Air baffle