Table of Contents
Advertisement
Note: Approximately 10 seconds after the server is connected to power, the power-control button
becomes active.
When prompted, <F1 Setup> is displayed, press F1. If you have set an administrator password, you
Step 2.
must type the administrator password to access the full Setup utility menu. If you do not type the
administrator password, a limited Setup utility menu is available.
Step 3.
Select System Settings ➙ Storage.
Step 4.
Press Enter to refresh the list of device drivers.
Step 5.
Select the device driver for your RAID controller and press Enter.
Step 6.
Follow the instructions in the documentation for your RAID controller.
Lenovo Advanced Settings Utility program
The Lenovo Advanced Settings Utility (ASU) program is an alternative to the Setup utility for modifying
UEFI settings.
Use the ASU program online or out of band to modify UEFI settings from the command line without the need
to restart the system to access the Setup utility.
You can also use the ASU program to configure the optional remote presence features or other IMM2.1
settings. The remote presence features provide enhanced systems-management capabilities.
In addition, the ASU program provides IMM LAN over USB interface configuration through the command-line
interface.
Use the command-line interface to issue setup commands. You can save any of the settings as a file and run
the file as a script. The ASU program supports scripting environments through a batch-processing mode.
For more information and to download the ASU program, go to https://support.lenovo.com/us/en/
documents/LNVO-ASU.
Updating the Universal Unique Identifier (UUID)
The Universal Unique Identifier (UUID) must be updated when the system board is replaced. Use the
Advanced Settings Utility to update the UUID in the UEFI-based server.
The ASU is an online tool that supports several operating systems. Make sure that you download the version
for your operating system. You can download the ASU from the Lenovo Web site. To download the ASU and
update the UUID, complete the following steps.
Note: Changes are made periodically to the Lenovo website. The actual procedure might vary slightly
from what is described in this document.
Step 1.
Download the Advanced Settings Utility (ASU):
a.
Go to http://www.lenovo.com/support.
b.
Click on the Downloads tab at the top of the panel.
c.
Under ToolsCenter, select View ToolsCenter downloads.
d.
Select Advanced Settings Utility (ASU).
e.
Scroll down and click on the link and download the ASU version for your operating system.
Step 2.
ASU sets the UUID in the Integrated Management Module (IMM). Select one of the following
methods to access the Integrated Management Module (IMM) to set the UUID:
• Online from the target system (LAN or keyboard console style (KCS) access)
.
Chapter 2
Configuration information and instructions
43
Advertisement
Table of Contents
Troubleshooting
