Related links
–
IBM Support website
–
Latest level of DSA
–
Latest level of BMC/IMM
•
089-901-000 : CPU Stress Test Failed
CPU Stress Test Failed.
Recoverable
No
Severity
Error
Serviceable
Yes
Automatically notify support
No
User Response
Complete the following steps:
1. If the system has stopped responding, turn off and restart the system and then run the test again.
2. Make sure that the DSA Diagnostic code is at the latest level.
3. Run the test again.
4. Check system firmware level and upgrade if necessary. The installed firmware level can be found
in the DSA Diagnostic Event Log within the Firmware/VPD section for this component.
5. Run the test again.
6. If the system has stopped responding, turn off and restart the system and then run the test again.
7. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service
Guide" for the next corrective action.
Related links
–
IBM Support website
–
Latest level of DSA
–
Latest level of BMC/IMM
DSA Emulex adapter test results
The following messages can result when you run the Emulex adapter test.
Test results for the DSA Emulex adapter test
The following messages can result when you run the DSA Emulex adapter test.
•
516-000-000 : ELXUCNA: NIC MAC LoopBackTest Passed
Appendix C. DSA diagnostic test results
853