Installing Axis Labels - adept technology AdeptViper s650 User Manual

5.4

Installing Axis Labels

The system includes a set of axis directional labels that can be installed on the robot. See
Table 5-3. Also refer to
yellow X-Y label can be used to indicate the X and Y axes in the World coordinate system
in your workcell.
Axis 5
AdeptViper s650/s850 Robot User's Guide, Rev A
Figure 1-1 on page 9 for a drawing of the axis identification. The
Table 5-3. Axis Directional Labels
Axis 3
Installing Axis Labels
Axis 2
Axis 1
Axis 4
Axis 6
53