Chapter 5 - System Operation
9. Once the calibration is complete, the system will return with a "dot" (.) prompt,
and the status panel display on the sDAI module will read "OK."
10. System is ready for operation.
5.2
Learning to Program the Robot
To learn how to use and program the robot, go to the
to find information on basic operation of the V
Instructions for Adept Utility Programs
programs.
For programming information you need to refer to the following list of optional manuals:
• V+ Language User's Guide
• V+ Language Reference Guide
• V+ Operating System Reference Guide
50
AdeptViper s650/s850 Robot User's Guide, Rev A
V+ Operating System User's Guide
+
Operating System. Also refer to the
for information on using the Adept utility