List Of Boards - GE MiCOM P40 Agile Technical Manual

P543i/P545i
Case width (TE)
40TE
60TE
80TE
Note:
Not all case sizes are available for all models.
3.2

LIST OF BOARDS

The product's hardware consists of several modules drawn from a standard range. The exact specification and
number of hardware modules depends on the model number and variant. Depending on the exact model, the
product in question will use a selection of the following boards.
Board
Main Processor board - 40TE or smaller
Main Processor board - 60TE or larger
Power supply board - 24/54V DC
Power supply board - 48/125V DC
Power supply board - 110/250V DC
Transformer board
Input board
Input board with opto-inputs
IRIG-B board - modulated input
IRIG-B board - demodulated input
Fibre board
Fibre board + IRIG-B
2nd rear communications board
2nd rear communications board with IRIG-B input
100MhZ Ethernet board
100MhZ Ethernet board with modulated IRIG-B
100MhZ Ethernet board with demodulated IRIG-B
High-break output relay board
Redundant Ethernet SHP+ modulated IRIG-B
Redundant Ethernet SHP + demodulated IRIG-B
Redundant Ethernet RSTP + modulated IRIG-B
Redundant Ethernet RSTP+ demodulated IRIG-B
Redundant Ethernet DHP+ modulated IRIG-B
Redundant Ethernet DHP+ demodulated IRIG-B
Redundant Ethernet PRP+ modulated IRIG-B
Redundant Ethernet PRP+ demodulated IRIG-B
Redundant Ethernet HSR + modulated IRIG-B
Redundant Ethernet HSR+ demodulated IRIG-B
Output relay output board
Coprocessor board with dual fibre inputs
P54x1i-TM-EN-1
Case width (mm)
203.2
304.8
406.4
Main Processor board – without support for function keys
Main Processor board – with support for function keys
Power supply input. Accepts DC voltage between 24V and 54V
Power supply input. Accepts DC voltage between 48V and 125V
Power supply input. Accepts DC voltage between 110V and 125V
Contains the voltage and current transformers
Contains the A/D conversion circuitry
Contains the A/D conversion circuitry + 8 digital opto-inputs
Interface board for modulated IRIG-B timing signal
Interface board for demodulated IRIG-B timing signal
Interface board for fibre-based RS485 connection
Interface board for fibre-based RS485 connection + demodulated IRIG-B
Interface board for RS232 / RS485 connections
Interface board for RS232 / RS485 + IRIG-B connections
Standard 100MHz Ethernet board for LAN connection (fibre + copper)
Standard 100MHz Ethernet board (fibre / copper) + modulated IRIG-B
Standard 100MHz Ethernet board (fibre / copper)+ demodulated IRIG-B
Output relay board with high breaking capacity relays
Redundant SHP Ethernet board (2 fibre ports) + modulated IRIG-B input
Redundant SHP Ethernet board (2 fibre ports) + demodulated IRIG-B input
Redundant RSTP Ethernet board (2 fibre ports) + modulated IRIG-B input
Redundant RSTP Ethernet board (2 fibre ports) + demodulated IRIG-B input
Redundant DHP Ethernet board (2 fibre ports) + modulated IRIG-B input
Redundant DHP Ethernet board (2 fibre ports) + demodulated IRIG-B input
Redundant PRP Ethernet board (2 fibre ports) + modulated IRIG-B input
Redundant PRP Ethernet board (2 fibre ports) + demodulated IRIG-B input
Redundant HSR Ethernet board (2 fibre ports) + demodulated IRIG-B input
Redundant HSR Ethernet board (2 fibre ports) + demodulated IRIG-B input
Standard output relay board
Coprocessor board with fibre connections for current differential inputs
Chapter 3 - Hardware Design
Case width (inches)
8
12
16
Use
35