Chapter 20 - Fibre Teleprotection
850 nm
multimode
optical fiber
P591
interface unit
Multiplexer
Multiplexer
P591
interface unit
850 nm
multimode
optical fiber
V02501
Figure 274: Interfacing to PCM multiplexers
Note:
P59x interface units should be mounted as close as possible to the telecommunications equipment to minimise interference
on the electrical connections.
3.1.6.2.1
INDIRECT CONNECTION - FIBRE (IEEE C37.94)
An 850 nm fibre-optic interface can connect directly to a multiplexer supporting the IEEE C37.94 standard. 850 nm
multi-mode optical fibres, either 50/125 mm or 62.5/125 mm are suitable. BFOC/2.5 type fibre optic connectors are
used.
508
850 nm
multimode
optical fiber
G.703
G.703
850 nm
multimode
optical fiber
P592
interface unit
V.35
Multiplexer or
xDSL modem
Multiplexer or
xDSL modem
V.35
P592
interface unit
850 nm
multimode
optical fiber
P593
interface unit
X.21
Multiplexer or
xDSL modem
Multiplexer or
xDSL modem
X.21
P593
interface unit
850 nm
multimode
optical fiber
P54x1i-TM-EN-1
P543i/P545i