Ricoh B064 SERIES Service Manual page 1404

BIT SWITCHES
G3-2 Switch 02 [SP No. 1-106-003]
No FUNCTION
G3 protocol mode used
0 0: Standard and non-standard
1: Standard only
1-4 Not used
Use of modem rate history for
transmission using
5 Quick/Speed Dials
0: Disabled
1: Enabled
6 Not used
Short preamble
7
0: Disabled, 1: Enabled
B819/B820
CÓPIA NÃO CONTROLADA
Change this bit to 1 only when the other end can
only communicate with machines that send T.30-
standard frames only.
1: Disables NSF/NSS signals (these are used in
non-standard mode communication)
Do not change the settings.
0: Communications using Quick/Speed Dials
always start from the highest modem rate.
1: The machine refers to the modem rate history
for communications with the same machine when
determining the most suitable rate for the current
communication.
Do not change the settings.
Refer to Appendix B in the Group 3 Facsimile
Manual for details about Short Preamble.
94
CÓPIA NÃO CONTROLADA
COMMENTS
SM