Dedicated Transmission Parameters; Programming Procedure - Ricoh B064 SERIES Service Manual

Hide thumbs Also See for B064 SERIES:

Table of Contents

DEDICATED TRANSMISSION PARAMETERS

There are two sets of transmission parameters: Fax and E-mail

Each Quick Dial Key and Speed Dial Code has eight bytes of programmable

parameters allocated to it. If transmissions to a particular machine often experience

problems, store that terminal's fax number as a Quick Dial or Speed Dial, and

adjust the parameters allocated to that number.

The programming procedure will be explained first. Then, the eight bytes will be

1. Set the bit 0 of System Bit Switch 00 to 1.

2. Enter Address Book Management mode ([User Tools]> System Settings> Key

Operator> Address Book Management).

3. Select the address book that you want to program.

4. For the fax parameter, select "Fax Dest.", for the E-mail parameter, select "E-

mail", then press "Start". Make sure that the LED of the Start button lights

5. The settings for the switch 00 are now displayed. Press the bit number that you

wish to change.

6. To scroll through the parameter switches, either:

7. Select the next switch: press "Next" or Select the previous switch: "Prev." until

the correct switch is displayed. Then go back to step 6.

8. After the setting is changed, press "OK".

9. After finishing, reset bit 0 of System Bit Switch 00 to 0.

CÓPIA NÃO CONTROLADA

DEDICATED TRANSMISSION PARAMETERS

CÓPIA NÃO CONTROLADA

Table of Contents

B246 series B140 series D052 series