Adjusting The Float Switch Circuit Hysteresis; Programme Choicetii Uv / Ro; Entering The System Type And Serial Number - Thermo Scientific Barnstead Pacific RO 3 Operating Instructions Manual

12.2.11 Adjusting the float switch circuit hysteresis:

An eleventh press on the menu-key:
Basic setting:
Setting range: Off:
On:
With a setting over 100 % for the upper switching point, the display of the tank level is switched
off, so that this setting shows whether an analogue or a digital float switch is installed.
The display shows:

12.2.12 Programme choiceTII UV / RO:

A twelfth press on the menu-key
The equipping grade of the system can be set in this menu so that a differentiation can be made
between TII UV and RO versions.
Basic setting: RO
The display shows:

12.2.13 Entering the system type and serial number:

The system type and serial number can be entered in this menu. They are both then printed as
headline on every print-out. The following types of system can be entered:
Pacific RO / Pacific TII / Pacific TII UV / Pacific AFS
The display shows:
32
Off: 100 %
On: 70 %
25 - 100 %
0 - 70 %
OEM menu
Off: 100 %
On: 70%
OEM menu
Version
RO
OEM menu
Type Pacific RO
S.No.: 9999/04
Thermo Scientific Barnstead Pacific RO
Pure water system