14.2.11 Adjusting the circuit hysteris of the float switch:
An eleventh press on the menu-key:
Basic setting:
Off: 100 %
On:
Setting range:
Off:
On:
With a setting over 100 % for the upper switching point, the display of the tank level is switched
off, so that this setting therefore shows whether an analogue or a digital float switch is installed.
The display shows:
14.2.12 Programme choice TII UV/ RO:
A twelfth press on the menu-key:
The grade of the equipping of the system can be set in this menu to differentiate between UPW
and PW versions.
Basic setting: TII UV
The display shows:
14.2.13 Entering the type and serial number of the system:
In this menu, the type and serial number of the system can be entered. They are then printed as
headline on every print-out. The following types of system can be entered:
LabTower RO / LabTower TII / LabTower TII UV / LabTower AFT
The display shows:
70 %
25 - 100 %
0 - 70 %
OEM menu
Off: 100 %
On: 70%
OEM menu
Equipping grade
TII UV
OEM menu
Type: LabTower AFT
S.Nr.: 9999/04
Thermo Scientific Barnstead LabTower AFT
Pure water system
35