Output Color (Selecting The Color For Copying) - Fuji Xerox ApeosPort-3 C4400 User Manual

When [Standard Size] is Selected
Select a paper size from standard paper sizes, and then select a paper type.
1
Select a paper size and a paper type.
Note • Select [
When [Custom Size] is Selected
Set the X (width) within the range from 100 to 483 mm, and the Y (height) within the
range from 100 to 305 mm in 1 mm increments.
Important • If the X (width) of non-standard size paper is less than 140 mm, documents may not be
• When copying on both sides of non-standard size paper, specify the size within the range
• When the C-Finisher or C-Finisher with Booklet Maker is installed, paper of which X direction
1
Enter a paper size using [
[ ].
2
Select a paper type.
Note • Select [

Output Color (Selecting the Color for Copying)

This feature allows you to select copy colors.
Note • If output color restrictions are set, the available colors will be restricted. For information, refer
1
Select a color mode.
] to return to the previous
screen or [ ] to move to the next screen.
printed properly.
from 140 to 432 mm for the X (horizontal) direction and from 140 to 297 mm for the Y
(vertical) direction.
is less than 140 mm will be delivered to the center tray. Every now and then, remove the
paper delivered to the center tray.
], [ ], [
] to return to the previous
screen or [ ] to move to the next screen.
to "5 Tools" > "Accounting" > "Create/View User Accounts" > "Account Limit" in the
Administrator Guide.
], and
Copy
3
69