My Fuji Xerox Machine Cannot Print, Scan, Or Pc-Fax Receive Over The Network - Fuji Xerox DocuPrint M375 df User Manual

Home > Troubleshooting
Receive over the Network
My Fuji Xerox Machine Cannot Print, Scan, or PC-FAX Receive over the
Network
Cause
Your security software
blocks your machine's
access to the network.
(The Network scanning
feature does not work. )
Your security software
blocks your machine's
access to the network.
(The network PC-Fax
Receive feature does not
work.)
®
(Windows )
Your security software
blocks your machine's
access to the network.
Your Fuji Xerox machine
was not assigned an
available IP address.
The failed print job is still
in your computer's print
queue.
> Network Problems > My Fuji Xerox Machine Cannot Print, Scan, or PC-FAX
Action
®
• (Windows )
Configure the third-party Security/Firewall Software to allow
Network scanning. To add port 54925 for Network scanning, type
the information below:
- In Name:
Type any description, for example Fuji Xerox NetScan.
- In Port number:
Type 54925.
- In Protocol:
UDP is selected.
See the instruction manual that came with your third-party
Security/Firewall Software or contact the software manufacturer.
Set the third-party Security/Firewall Software to allow PC-FAX Rx. To
add port 54926 for Network PC-FAX Rx, type the information below:
• In Name:
Type any description, for example Fuji Xerox PC-FAX Rx.
• In Port number:
Type 54926.
• In Protocol:
UDP is selected.
See the instruction manual that came with your third-party Security/
Firewall Software or contact the software manufacturer.
Some security software might block access without showing a security
alert dialog box even after successful installation.
To allow access, see the instructions for your security software or ask
the software manufacturer.
• Confirm the IP address and the Subnet Mask.
Verify that both the IP addresses and Subnet Masks of your
computer and the Fuji Xerox machine are correct and located on
the same network.
For more information about how to verify the IP address and the
Subnet Mask, ask your network administrator.
®
• (Windows )
Confirm the IP address and the Subnet Mask using the Network
Connection Repair Tool.
• If the failed print job is still in your computer's print queue, delete it.
• Otherwise, double-click the printer icon in the following folder and
cancel all documents:
®
- (Windows 7)
Click (Start) > Devices and Printers > Printers and
Faxes.
®
- (Windows 8)
Move your mouse to the lower right corner of your desktop.
When the menu bar appears, click Settings > Control Panel.
In the Hardware and Sound group, click View devices and
printers > Printers.
Interface
Wired/Wireless
Wired/Wireless
Wired/Wireless
Wired/Wireless
Wired/Wireless
535