Specifying A Destination Using The Redial Feature; Specifying A Line (Port) - Fuji Xerox ApeosPort-V C7776 User Manual

4 Fax

Specifying a Destination Using the Redial Feature

You can specify recipients using the Redial feature.
Important • When transmission to a certain recipient is prohibited in the System Administration mode, [Redial
1
Select [Redial List].
2
Select items you want to specify for a recipient,
and select [Close].
4

Specifying a Line (Port)

When the Additional G3 Port Kit 2 (optional) is installed, you can specify the line (port) and
send faxes. Local terminal information can be registered to each line. You can use each line
for a different purpose.
You can specify a line (port) using the keyboard screen or [Line Selection].
Important • When transmission to a certain recipient is prohibited in the System Administration mode, the
For information on how to set [Local Terminal Information], refer to "5 Tools" > "Fax Service Settings" > "Local Terminal
Information" in the Administrator Guide.
Specifying a line (port) using the keyboard screen
1
Press the keyboard button.
228
• Even though a line is specified in the above keyboard screen, when the lines are specified by
selecting [Line Selection] in the [Fax /Internet Fax] screen, a fax job will be transmitted in the setting
of [Line Selection]. For more information, refer to "Specifying a line (port) using [Line Selection]"
(P.229).
List] cannot be used.
keyboard button cannot be used.