Table of Contents
Advertisement
3
If the previous settings still remain, press the
<Clear All> button.
4
Select each tab, and select a feature as
necessary.
Note
The following shows the reference section for each tab.
"Fax/Internet Fax" (P.223)
"Layout Adjustment" (P.241)
"Fax/Internet Fax Options" (P.246)
"More Options" (P.265)
Step 3 Specifying Destinations
Three methods are available to specify recipients: by phone number, by address number,
and by group dial number. The following shows input methods supported by each method.
Phone Number
Address Number
(Speed Dialing)
Group Dial Number
O
:
Available
X
:
Not available
* : There are two ways in which address numbers and stored programs are assigned to the one touch buttons. Select either of the
following:
[Type 1] The buttons 1 to 70 are used for address numbers and they correspond to the registered address
[Type 2] The buttons 1 to 60 are used for address numbers and they correspond to the registered address
By default, [Type 1] is selected. For information on how to change the settings registered to the one touch buttons, refer to
"5 Tools" > "Common Service Settings" > "Screen/Button Settings" in the Administrator Guide.
• When you press the <Power Saver> button
while configuring the features, you can select
whether to enable the 2 Sided (Skip Blank
Pages) feature. For more information on [2
Sided (Skip Blank Pages)], refer to "2 Sided
(Skip Blank Pages)" (P.222).
Numeric Keypad
4 digits (0001 to 2000)
3 digits + *
(nnn0 to nnn9)
2 digits + *
(nn00 to nn99)
# + 2 digits
numbers 0001 to 0070, while the buttons 71 and 72 are used for stored programs and they
correspond to the registered stored programs 1 and 2.
numbers 0001 to 0060, while the buttons 61 to 70, M01, and M02 are used for stored programs
and they correspond to the registered stored programs 1 to 12.
One Touch
Buttons
O
X
2 digits (1 to 70) or
*
(1 to 60)
X
Fax Procedure
<Clear All> button
4
Address Book
X
From the list tab
and index
O
193
Advertisement
Table of Contents
