Line Card Error Messages - Cisco SCE 8000 Installation And Configuration Manual

10 gbe
Hide thumbs Also See for SCE 8000:
Table of Contents

Advertisement

Line Card Error Messages

Control Card Error Message %LOCAL7-3-MESSAGE_QUEUE_FAILURE "This is a five string dbg
message 1
Control Card Error Message %LOCAL7-3-INIT_FAILED "Subscriber database initialization
failed."
Error Message %LOCAL7-3-RUN_PARTIES_FAILD_NAME_DEFAULT
- failed to change default subscriber name to <%s>."
Control Card Error Message %LOCAL7-3-RUN_PARTIES_FAILED_INSERT_PARTY "subscriber
database load - failed to insert subscriber <%s>."
Line Card Error Messages
Line Card Error Message %LOCAL7-3-DP_SEARCH_ENGINE_FAILURE "A HW failure in the
tunneling engine has been detected. Please speak with Cisco customer support"
Cisco SCE8000 GBE Installation and Configuration Guide
C-6
Explanation
This message is generated when Cisco SCE fails to read the logger message from the
logger queue because the queue is corrupted. This message displays the error details of the queue,
queue index, and queue information.
Recommended Action
None.
Explanation
This error message is generated when the task of spawning the party DB manager fails.
None.
Recommended Action
This message is generated when an error occurs while changing the default name of the
Explanation
subscriber.
None.
Recommended Action
This message is generated when a problem occurs while inserting a new subscriber into
Explanation
the party database.
None.
Recommended Action
This message is displayed to indicate that a hardware failure occurred in the tunneling
Explanation
engine, and may cause an unusual behavior of the device.
None. Contact Cisco Customer Support.
Recommended Action
Appendix C Cisco Service Control Engine System Log Messages
"subscriber database load

Advertisement

Table of Contents
loading

Table of Contents