Cabling The 10 Gbe Line Interface Ports: Using The External Optical Bypass Module - Cisco SCE 8000 Installation And Configuration Manual

Cabling the 10 GBE Line Interface Ports: Using the External Optical Bypass Module

Cabling the 10 GBE Line Interface Ports: Using the External Optical Bypass
Module
See
Figure 6-2
Take the appropriate fiber optic cable (see
Step 1
and plug it into the appropriate port (A or B) on the external bypass module.
Step 2 Using a cable with LC connectors on both ends, plug one end into the appropriate port (C or D) on the
external bypass module and the other end into the appropriate 10 GBE interface in slot 3 of the
Cisco SCE 8000 chassis.
Cisco SCE8000 GBE Installation and Configuration Guide
6-14
Optical Bypass Module Connectivity, page 6-9
External Optical Bypass Module Line Interfaces
T X
R X
A
Chapter 6 Cabling the Line Ports and Completing the Installation
for specific connectivity
T X
T X
A
T X
B
R X
A
R X
R X C
B
C
D
S T A T U S
XFP Module Cabling and Connection Equipment, page
(Figure 6-2).
C
D
C T R L
B
D
O P B — S C
E 8 K — M M
6-11)