Cabling The 10 Gbe Line Interface Ports; Xfp Module Cabling And Connection Equipment - Cisco SCE 8000 Installation And Configuration Manual

Chapter 6 Cabling the Line Ports and Completing the Installation

Cabling the 10 GBE Line Interface Ports

When installing an External Optical Bypass module, the Cisco SCE 8000 line ports are connected to the
Note
module. See the
page 6-14
Class 1 laser. Avoid exposure to radiation and do not stare into open aperture.
Warning
Statement 1008
This section describes the following topics:
•
•
•
•

XFP Module Cabling and Connection Equipment

Table 6-1
10 Gigabit Ethernet SPA. All XFP ports have LC-type connectors.
Table 6-1
XFP Product Number
XFP-10GLR-OC192SR
XFP-10GER-OC192IR
XFP-10GZR-OC192IR
XFP-10G-MM-SR
Cabling the 10 GBE Line Interface Ports: Using the External Optical Bypass Module,
for complete instructions.
XFP Module Cabling and Connection Equipment, page 6-11
Optical Device Maintenance, page 6-12
How to Cable the 10 GBE Line Interface Ports, page 6-13
Cabling the 10 GBE Line Interface Ports: Using the External Optical Bypass Module, page 6-14
and Table 6-2 provide cabling specifications for the XFP modules that can be installed on the
XFP Transceiver Port Cabling Specifications
Nominal
Wavelength
(nm)
1310
1550
1550
850
Cabling the 10 GBE Line Interface Ports
Core Size
Cable Type (microns)
SMF G.652
SMF G.652
SMF G.652
MMF G.652
Cisco SCE8000 GBE Installation and Configuration Guide
Maximum Cabling Distance
• 10 km (6.2 miles)
10-Gigabit Ethernet
2 km (1.24 miles)
•
OC-192/STM-64 SR1
40 km (24.86 miles)
80 km (10 miles)
26 m to 300 m
(85.3 to 984.3 feet)
6-11