Cisco SCE 8000 Installation And Configuration Manual page 215

Appendix C Cisco Service Control Engine System Log Messages
Error Message %LOCAL7-6-SWITCH_CONNECTION_OPEN: "Formatter switched active
connection to: address %s, port %d, category %d."
Explanation
number, and the category of the switched connection that is in active state.
Recommended Action
Error Message %LOCAL7-6-CONNECTION_CLOSED: "Formatter connection closed
Explanation
with the port number of the connection that is closed.
Recommended Action
Error Message %LOCAL7-6-CONNECTION_OPENED: "Formatter connection opened
Explanation
the port number for which the connection is opened.
Recommended Action
Error Message %LOCAL7-6-LOGGERLINEATTACKLOGFULLTRAP: "<%s>"
Explanation
Recommended Action
Error Message %LOCAL7-6-LINKMODE_BYPASS_TRAP: "<%s>"
Explanation
Recommended Action
Error Message %LOCAL7-6-LINKMODE_FORWARDING_TRAP: "<%s>"
Explanation
Recommended Action
Error Message %LOCAL7-6-LINKMODE_CUTOFF_TRAP: "<%s>"
Explanation
Recommended Action
This message is displayed to provide the details of the RDR formatter IP address, port
None.
This message is displayed to provide the details of the RDR formatter IP address along
None.
This message is displayed to provide details of the RDR formatter IP address along with
None.
This trap is generated when the logger file, LineAttackLog, is full.
None.
This trap is generated when the Cisco SCE link mode is set to bypass state.
None.
This trap is generated when the Cisco SCE link mode is set to forwarding state.
None.
This trap is generated when the Cisco SCE link mode is set to cutoff state.
None.
Informational Messages, Severity Level 6
Cisco SCE8000 GBE Installation and Configuration Guide
C-19