Cisco SCE 8000 Installation And Configuration Manual page 231

Appendix C Cisco Service Control Engine System Log Messages
Error Message %LOCAL7-6-CONFIG_FILES_OK: "Configuration files executed with no
errors."
Explanation
any errors during the system boot process.
Recommended Action
Error Message %LOCAL7-6-SSH_ERROR: "Failed starting SSH server, error is %s."
Explanation
system boot process that is mentioned in the error description.
Recommended Action
Error Message %LOCAL7-6-OPERATIONAL_STATUS_CHANGED: "<%s>"
Explanation
in the description.
Recommended Action
Error Message %LOCAL7-6-LOSS_OF_SYNC: "Lost synchronization with peer '<%s>' -
removing its subscribers"
Explanation
when it detects the loss of synchronization with the peer identified by the corresponding peer name.
Cisco SCE removes all the events sent to the peer connection and all the subscribers owned by that
peer connection.
Recommended Action
Error Message %LOCAL7-6-PEER_CONNECTED: "Connection established with peer '<%s>'"
Explanation
Recommended Action
Error Message %LOCAL7-6-PEER_CLOSE: "Closing connection with peer '<%s>' - <%s>"
Explanation
–
–
–
–
–
–
This message is generated when all the startup configuration files are executed without
None.
This message is generated when Cisco SCE fails to start the SSH server during the
None.
This message is generated when the system operational status is changed as mentioned
None.
This message is triggered by the Service Control Management Protocol (SCMP) engine
None.
This message is displayed when connection with the corresponding peer is established.
None.
This message is generated when any of the following conditions occur:
When a user requests that a debug be closed.
When a user requests that the connection be closed.
When the SCMP engine is disabled.
When Cisco SCE becomes the standby engine in the SCMP engine.
When a keepalive session timeout occurs.
When a peer-indicated connection is down.
Informational Messages, Severity Level 6
Cisco SCE8000 GBE Installation and Configuration Guide
C-35