Cisco SCE 8000 Installation And Configuration Manual page 235

10 gbe
Hide thumbs Also See for SCE 8000:
Table of Contents

Advertisement

Appendix C Cisco Service Control Engine System Log Messages
Error Message %LOCAL7-6-VAS_LC_GROUP_IS_ACTIVE : "VAS Server Group %lu is now
operative"
Explanation
Recommended Action
Error Message %LOCAL7-6-VAS_LC_SERVER_IS_UP: "VAS server %lu is UP"
Explanation
Recommended Action
Error Message %LOCAL7-6-VAS_LC_DETECTED_VAS_LINK_FAILURE: "Detected a VAS failure on
link %lu, switching VAS traffic to the other link"
Explanation
traffic is switched to another link.
Recommended Action
Error Message %LOCAL7-6-VAS_LC_CHANGE_TRAFFIC_LINK_OK : "VAS traffic link has been
set to link %lu"
Explanation
Recommended Action
Error Message %LOCAL7-6-VAS_HC_SERVER_LOG_EVENT_STATE_INIT: "Vas Health Check
Monitor
Explanation
is initialized.
Recommended Action
Error Message %LOCAL7-6-VAS_HC_SERVER_LOG_EVENT_STATE_NOT_CHECKED: "Vas Health
Check Monitor
Explanation
is stopped.
Recommended Action
Error Message %LOCAL7-6-VAS_HC_SERVER_LOG_EVENT_STATE_UP: "Vas Health Check Monitor
Explanation
Recommended Action
This message is displayed when the VAS server group becomes operational.
None.
This message is displayed when the VAS server is up.
None.
This message is displayed when a VAS failure is detected on a given link and the VAS
None.
This message is generated when the VAS traffic link has been set to a given link.
None.
This message is generated when the VAS health check monitor for a given VAS server
None.
This message is generated when the VAS health check monitor for a given VAS server
None.
This message is displayed to indicate that the VAS health check monitor state is up.
None.
Informational Messages, Severity Level 6
Cisco SCE8000 GBE Installation and Configuration Guide
C-39

Advertisement

Table of Contents
loading

Table of Contents