Cisco SCE 8000 Installation And Configuration Manual page 210

Informational Messages, Severity Level 6
Error Message %LOCAL7-6-EXTERNAL_BYPASS_WIRE_TEST_AUTO_NEG_TEMP_OFF:"External
bypass test is on. deactivating auto-negotiation for interface <intf-name>."
Explanation
if supported, is deactivated for the interface.
In this message, intf-name is the name of the interface.
Recommended Action
Error Message %LOCAL7-6-EXTERNAL_BYPASS_WIRE_TEST_AUTO_NEG_BACK_ON:"Ending external
bypass test.
<intf-name>"
Explanation
autonegotiation is reactivated for the corresponding interface.
In this message, intf-name is the name of the interface.
Recommended Action
Error Message %LOCAL7-6-EXTERNAL_BYPASS_WIRE_TEST_EB_ON:"External bypass test is
on. Manually activating the external bypass units."
Explanation
external bypass units are being manually activated.
Recommended Action
Error Message %LOCAL7-6-EXTERNAL_BYPASS_WIRE_TEST_EB_BACK:"Ending external bypass
test. Restored the external bypass units' activation status"
Explanation
the restoration of the external bypass units' activation status.
Recommended Action
Error Message %LOCAL7-6-SET_IP:"IP address of slot slot-num set to ip-addr, subnet
mask subnet-mask."
Explanation
slot is being set.
In this message, ip-addr indicates the IP address of the slot, subnet-mask indicates the subnet mask
of the slot, and slot-num indicates the number of the slot.
Recommended Action
Cisco SCE8000 GBE Installation and Configuration Guide
C-14
This message is displayed while performing the external bypass test. Auto negotiation,
None.
Restoring the activation status of auto-negotiation for interface
This message is displayed after the external bypass test is completed, and
None.
This message is displayed to indicate that the external bypass test is on, and that the
None.
This message is displayed after the completion of the external bypass test, and during
None.
This message is displayed while the IP address and subnet mask for the corresponding
None.
Appendix C Cisco Service Control Engine System Log Messages