Checking The Leds - Cisco SCE 8000 Installation And Configuration Manual

Chapter 8 Troubleshooting

Checking the LEDs

The LEDS on the Cisco SCE 8000-SMC-E front panel, along with the LEDs on the power supplies and
fan assembly are the most immediate problem-detection mechanism of the platform. See the following
sections for information on Cisco SCE 8000 platform LEDS:
•
•
•
•
Cisco SCE 8000 Operational Status
Table 8-2
module reflects the current Cisco SCE 8000 operational status (see
is complete, the operational status can be displayed using CLI command show system operation-status.
Table 8-2 Cisco SCE 8000 Operational States
Cisco SCE 8000
Operational Status
Booting
Operational
Table 2-3 on page 2-5
Examining the LEDs, page 6-16
Starting the System and Observing Initial Conditions, page 7-3
Cisco SCE 8000 Operational Status, page 8-5
lists the operational states of the Cisco SCE 8000. The Status LED on the Service Control
Description
Initial state after reset.
Cisco SCE 8000 becomes operational after completing the
following process:
Boot is completed.
•
Power-on self-tests are completed without failure.
•
Platform configuration is applied.
•
Information About Troubleshooting Tools
Table 8-3
Cisco SCE8000 GBE Installation and Configuration Guide
and Table 8-4). Once boot
Status LED State
Amber
Steady green
8-5