Control Card Error Messages - Cisco SCE 8000 Installation And Configuration Manual

Appendix C Cisco Service Control Engine System Log Messages

Control Card Error Messages

Control Card Error Message %LOCAL7-3-RESTART_FAILED_SHUT_DOWN "Management agent restart
procedure failed
Control Card Error Message %LOCAL7-3-RESTART_FAILED_START_UP "Management agent restart
procedure failed
Control Card Error Message %LOCAL7-3-SIMBA_USR_HW_MONITOR_ERROR"<%s>
Control Card Error Message %LOCAL7-3-GEN_CONFIG_FILES_BAD "General configuration file
executed with %lu errors. Please view the file '<%s>' for details."
Control Card Error Message %LOCAL7-3-APP_CONFIG_FILES_BAD "Application configuration
files executed with %lu errors."
Control Card Error Message %LOCAL7-3-LOGGER_USER_ERR_MSG "<%s>"
This message is displayed to indicate that the management agent is going to restart, and
Explanation
the status of the management agent is not down.
None.
Recommended Action
This message is displayed to indicate that the management agent is down, and hence the
Explanation
service mode configuration is set to true for restarting the management agent.
Recommended Action None.
This message is displayed to indicate that a hardware error occurred and may cause
Explanation
unusual behavior of the device.
Generate the support file and contact Cisco Customer Support.
Recommended Action
This message is displayed when an error occurs when startup configuration is applied.
Explanation
However, if one of the CLIs fails during the configuration, that CLI will not be effective.
Recommended Action Generate the support file and contact Cisco Customer Support.
This message is displayed when an error occurs when application configuration is
Explanation
applied. If one of the CLIs fails during the configuration, that CLI will not be effective.
Recommended Action Generate the support file and contact Cisco Customer Support.
This message is generated when you add your own error messages to the user log file
Explanation
using the logger add-user-message command.
Recommended Action None.
Cisco SCE8000 GBE Installation and Configuration Guide
Control Card Error Messages
C-5