Checking The Shipping Container Contents; Cisco Sce 8000 Component And Accessory Lists - Cisco SCE 8000 Installation And Configuration Manual

Checking the Shipping Container Contents

Checking the Shipping Container Contents
Use the Cisco SCE 8000 Component List to check the contents of the Cisco SCE 8000 platform shipping
container.
Tip Do not discard the shipping container when you unpack the Cisco SCE 8000. Flatten the shipping cartons
and store them with the pallet. You need these containers to move or ship the Cisco SCE 8000.

Cisco SCE 8000 Component and Accessory Lists

Table 2-10
Table 2-10
Component
Cisco SCE 8000-SCM-E
Cisco SCE 8000-SIP
2 or 4 SPA Jacket cards
2 or 4 XFP OpticsXFP optic modules.
2 Cisco PWR-2700-AC/4 or
2 Cisco PWR-2700-DC/4
Cisco SCE 8000-FAN
Table 2-11
Table 2-11
Accessory
Management cables
Power cables
Grounding kit 69-0815-01
Optical Bypass module kit
Cisco SCE8000 GBE Installation and Configuration Guide
2-18
lists the Cisco SCE 8000 components.
Cisco SCE 8000 Component List
lists the Cisco SCE 8000 accessories.
Cisco SCE 8000 Accessory List
Chapter 2 Introduction to the Cisco SCE 8000 10 GBE Platform
Description
Cisco SCE 8000 Service Control Module.
Cisco SCE 8000 SPA Jacket card Interface Processor.
SPA Interface. See the following list of supported SPA
models.
See the following list of supported XFP models.
Cisco power supply units, AC or DC.
Hot swappable, redundant power supply.
Redundant fans unit.
Description
Gigabit Ethernet cable for connecting to the
•
Management ports
RS-232 serial cables (DB-9 to RJ-45 and DB-25 to
•
RJ-45) for connecting to a local terminal
Two AC power supply cords, if ordered with AC-input power
supply units
Grounding lug
•
Two M4 hex-head screws with locking washers
•
Optical Bypass Module
•
• Control Cable (2 m)
• Control Cable (40 cm)