Appendix; Cisco Service Control Engine System Log Messages - Cisco SCE 8000 Installation And Configuration Manual

Cisco Service Control Engine System Log
Messages
Revised: August 26, 2014
The Cisco Service Control Engine (SCE) 8000 generates system, error, and other informational
messages to inform Cisco SCE 8000 users of significant events. This appendix describes the system log
messages generated by the Cisco SCE 10 8000 GBE platform.
The system messages in the Cisco SCE 8000 platform have the following structure:
%FACILITY-SEVERITY-MNEMONIC: Description
The following list describes the various components of the message structure:
FACILITY indicates the platform that is generating the message. The FACILITY value in the Cisco
•
SCE 8000 platform indicates LOCAL7, which represents the default facility type of the Cisco SCE
8000 platform.
• SEVERITY is a numeral that reflects the severity of the corresponding error condition. The
messages have a severity level ranging from 0 to 6, with 0 indicating the highest severity level and
6 the lowest.
MNEMONIC uniquely identifies the message. All mnemonics are uppercase character strings.
•
Description describes the corresponding error condition and contains variable fields that change
•
from message to message. The variable fields can represent IP addresses, character strings,
filename, and so on.
This document lists the following system message categories by severity level. Each message is followed
by an explanation and a recommended action.
Fatal Messages, Severity Level 2, page C-2
•
Error Messages, Severity Level 3, page C-4
•
Common Error Messages, page C-4
–
Control Card Error Messages, page C-5
–
Line Card Error Messages, page C-6
–
Informational Messages, Severity Level 6, page C-7
•
• Warning Messages, Severity Level 4, page C-41
• Emergency Messages, Severity Level 0
• Alert Messages, Severity Level 1
Critical Messages, Severity Level 2
•
A P P E N D I X
Cisco SCE8000 GBE Installation and Configuration Guide
C
C-1