Physical Topologies; Cisco Sce 8000 Interface Numbering; Single Cisco Sce 8000 Topologies - Cisco SCE 8000 Installation And Configuration Manual

Physical Topologies

Physical Topologies
The following sections are descriptions of several physical topologies that Cisco SCE 8000 supports:
•
•
•
•

Cisco SCE 8000 Interface Numbering

Figure 3-1
in this chapter. The interface numbering is explained as follows:
•
•
•
•
•
Figure 3-1
Subscriber
Subscriber

Single Cisco SCE 8000 Topologies

A single Cisco SCE 8000 supports both single 10 GBE link and dual 10 GBE link topologies:
•
•
•
•
Cisco SCE8000 GBE Installation and Configuration Guide
3-4
Cisco SCE 8000 Interface Numbering, page 3-4
Single Cisco SCE 8000 Topologies, page 3-4
Dual Cisco SCE 8000 Topology (Cascade), page 3-8
Multi-Gigabit Service Control Platform (MGSCP) Topology, page 3-9
shows the numbering of the Cisco SCE 8000 interfaces as indicated in the topology diagrams
First digit is the slot number (always 3).
Second digit is the number of the sub-slot or SPA module (0 to 3).
Third digit is the number of the interface on the designated SPA module (always 0).
Interfaces 3/0/0 and 3/2/0 are on the two left SPA modules and are the Subscriber-side interfaces.
Interfaces 3/1/0 and 3/3/0 are on the two right SPA modules and are the Network-side interfaces.
Cisco SCE 8000 Interface Numbering
3/0/0
3/1/0
3/2/0 3/3/0
Single Link: Inline Topology, page 3-5
Dual Link: Inline Installation, page 3-5
Single Link: Receive-only Topology, page 3-6
Dual Link: Receive-Only Topology, page 3-7
Chapter 3 Cisco SCE 8000 Topology and Topology-Related Parameters
Network
Network