Fatal Messages, Severity Level 2 - Cisco SCE 8000 Installation And Configuration Manual

Fatal Messages, Severity Level 2

•
•
Fatal Messages, Severity Level 2
Fatal Message %LOCAL7-2-SE_USER_FATAL "SE <%s> Module: A Fatal Error occurred.
Please report to Cisco's customer support"
Fatal Message %LOCAL7-2-LOGGER_USER_FATAL_MSG "<%s>"
Fatal Message %LOCAL7-2-DP_CLS_SEQ_ERR "HW internal error
Fatal Message %LOCAL7-2-CLS_FF_SEQ_ERR "HW internal error
Fatal Message %LOCAL7-2-DP_IN_SEQ_ERR "HW internal error
Fatal Message %LOCAL7-2-DP_OUT_SEQ_ERR "HW internal error
Cisco SCE8000 GBE Installation and Configuration Guide
C-2
Warning Messages, Severity Level 4
Notice Messages, Severity Level 5
This message is generated to inform that a fatal error has occurred.
Explanation
Report this to Cisco Customer Support.
Recommended Action
This message is generated while you add your own fatal messages to the user log file
Explanation
using the logger add-user-message command in the CLI.
None.
Recommended Action
This is an internal hardware error. This fatal hardware interrupt is generated when there
Explanation
is a mismatch in the sequence of messages to the classifier.
None.
Recommended Action
This is an internal hardware error. This fatal hardware interrupt is generated when there
Explanation
is a mismatch in the sequence of messages to the flow filter.
None.
Recommended Action
This is an internal hardware error. This fatal hardware interrupt is generated when there
Explanation
is a mismatch in the sequence of the dispatcher input messages.
None.
Recommended Action
This is an internal hardware error. This fatal hardware interrupt is generated when there
Explanation
is a mismatch in the sequence of the dispatcher output messages.
None.
Recommended Action
Appendix C Cisco Service Control Engine System Log Messages