Cisco SCE 8000 Installation And Configuration Manual page 244

Warning Messages, Severity Level 4
Warning Message %LOCAL7-4-VAS_LC_SERVER_IS_DOWN "VAS server %lu is DOWN"
Explanation
Recommended Action
Warning Message %LOCAL7-4-VAS_HC_SERVER_LOG_EVENT_STATE_DOWN "Vas Health Check
Monitor: NO vital signs from VAS server %lu."
Explanation
Recommended Action
Warning Message %LOCAL7-4-VAS_HC_SERVER_LOG_EVENT_NO_IPS "Vas Health Check Monitor
Explanation
for the VAS server.
Recommended Action
Warning Message %LOCAL7-4-STANDBY_VIOLATION: "Subscriber operations are not
permitted on standby box - discarding operation"
Explanation
the Cisco SCE is on the standby mode.
Recommended Action
Warning Message %LOCAL7-4-DEBUG_TELNET_ACCESS_FAILED: "Fail to <%s> debug-telnet
(port 2300)"
Explanation
remote machines.
Recommended Action
Warning Message %LOCAL7-4-DEBUG_SHELL_ACCESS_FAILED: "Fail to <%s> debug-shell
(port 2301)"
Explanation
from the remote machines.
Recommended Action
Cisco SCE8000 GBE Installation and Configuration Guide
C-48
This message is displayed when the VAS server is down.
None.
This message is displayed when the VAS Helath Check Server state is DOWN.
None.
This message is displayed when the VAS Health Check Monitor does not run the check
None.
This message is displayed when the subscriber-related commands are executed when
None.
This message is displayed when Cisco SCE fails to enable debug telnet access from the
None.
This message is displayed when Cisco SCE fails to enable Cisco SCOS shell access
None.
Appendix C Cisco Service Control Engine System Log Messages