Leds; Chassis Leds - Cisco Nexus 9504 Hardware Installation Manual

LEDs

•
•
•
•
•
•
•

Chassis LEDs

The chassis LEDs are located at the top of the front of the chassis. They indicate whether each module
(supervisors, controllers, line cards, fabric modules, fan trays, and power supplies) is fully functional or have
a fault condition. The following table describes the possible states for each of these LEDs.
LED
BCN
SUP
FAB
IOM
PSU
Chassis LEDs, on page 121
System Controller LEDs, on page 122
Supervisor Module LEDs, on page 122
Fan Tray LEDs, on page 123
Fabric Module LEDs, on page 124
Line Card LEDs, on page 124
Power Supply LEDs, on page 125
Color Status
Flashing The operator has activated this LED to identify this chassis.
blue
Off This chassis is not being identified.
Green Supervisor modules are all operational.
Amber Check the
Fabric modules are all operational.
Green
Amber Check the FAB LED description in the
Green Line cards (I/O modules) are all operational.
Amber Check
Power supplies are all operational.
Green
Amber Check the
A P P E N D I X
Supervisor Module LEDs
Line Card LEDs, on page 124
Power Supply LEDs for more information.
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
B
for more information.
Fan Tray LEDs for more information.
for more information.
121