Changing The Network Addressing - Ruckus Wireless ZoneDirector 1100 User Manual

Figure 22. The Identity section on the Configure > System page

Changing the Network Addressing

If you need to update the IP address and DNS server settings of ZoneDirector, follow
the steps outlined below.
CAUTION!
disconnected from your web interface connection to ZoneDirector. You can log into
the web interface again by using the new IP address in your web browser.
1 Go to Configure > System.
2 Review the Device IP Settings options.
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
As soon as the IP address has been changed (applied), you will be
Changing the Network Addressing
Changing the System Name
57