Ruckus Wireless ZoneDirector 1100 User Manual page 85

6 To verify that ZoneDirector can send alarm messages using the SMTP settings
you configured, click the Test button.
• If ZoneDirector is able to send the test message, the message Success!
appears at the bottom of the Email Notification page. Continue to
• If ZoneDirector is unable to send the test message, the message Failed!
appears at the bottom of the Email Notification page. Go back to
then verify that the SMTP settings are correct.
7 Click Apply. The email notification settings you configured become active
immediately.
Figure 41. The Alarm Settings page
NOTE: If the Test button is clicked, ZoneDirector will attempt to connect to the mail
server for 10 seconds. If it is unable to connect to the mail server, it will stop trying
and quit.
NOTE: When the alarm email is first enabled, the alarm recipient may receive a flood
of alarm notifications. This may cause the mail server to treat the email notifications
as spam and to temporarily block the account.
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
Setting Up Email Alarm Notifications
Customizing the Current Log Settings
Step 7
Step 5, and
85